K-60 Drain Snake, 1-1/4 to 4 in Drain, 1/2 hp, 7/8 in x 75 ft L Cable
PartRGD66497
MFG66497
Description
RIDGID® Sectional Drain Cleaning Machine, 1-1/4 to 4 in Drain, 1/2 hp, 115 VAC, 7 A, 600 rpm, 18 in L x 9-1/2 in W x 14 in H
Price/Availability Accessible On Login
- A compact machine for institutional, commercial or residential cleaning, also ideal for septic tank vacuum truck operators, small enough to fit into cramped spaces, yet powerful enough to clear tough blockages
- Ideal for rooftop vent stacks, rear handle allows for easy transporting up ladders and onto rooftops
- Remove only two bolts to access jaw set for cleaning or replacement, removal of same bolts provides access to belt drive
- Equipped with 1/2 hp motor approved to CSA and UL standards (NRTLC)
- Simple adjustment knob allows unit to spin both 7/8 and 5/8 in dia cable, adjusts in seconds
- 7/8 in cable (C-10) cleans 2 to 4 in lines through 150 ft
- 5/8 in cable (C-7, C-8, C-9) cleans 1-1/4 to 4 in lines through 125 ft
- 115 V 60 Hz reversible motor
The RIDGID® K-60SP is a portable Drain Cleaning Machine designed to clean 11/4 in to 4 in drain lines. Applications include laundry tubs, floor drains, roof vents and stack lines. Rear handle allows for transporting up ladders and cleaning roof-top vent stacks. The machine is driven by a 1/2 HP motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle switch provides FOR/OFF/REVERSE control of the motor. The K-60SP is designed to use sectional-type cable that has a quick change coupling system for disconnecting tools. The cable is manually fed in and out of the drain and rotates at a speed of 600 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released. An adjustment knob allows the K-60SP to use both 5/8 in and 7/8 in sectional cable.
| Drain Line Capacity | 1-1/4 to 4 in |
| Cable Diameter | 7/8 in |
| Cable Length | 75 ft |
| Series | K-60 |
| Amperage Rating | 7 A |
| Dimensions | 18 in L x 9-1/2 in W x 14 in H |
| Drum Capacity | 150 ft of 7/8 in, 125 ft of 5/8 in Cable |
| Horsepower | 1/2 hp |
| Speed | 600 rpm |
| Tool/Kit | Kit |
| Voltage Rating | 120 VAC |
| Brand | RIDGID® |
| UNSPSC | 26120000 |
| Alternate Part Number 1 | K-60SP-SE |
| Country of Origin | US |
| Manufacturer | Emerson Electric |
| UPC | 095691664976 |
| Manufacturer Part Number | 66497 |
A-1 Operator's Mitt, A-12 Pin Key, A-60-12 Rear, Guide Hose, A-61 Tool Kit and A-62 Cable Kit
Lifetime
Price/Availability Accessible On Login
- Recommended Accessories
- Competitive Brands
- Recently Viewed
No applicable products
No applicable products
No applicable products
RIDGID®K-60 Drain Snake, 1-1/4 to 4 in Drain, 1/2 hp, 7/8 in x 75 ft L Cable
- Customers Also Purchased
No applicable products