LGM Cooling Air Handler, 2 ton, 24 Kbtu/hr
PartAPNLGM24D4000
MFGLGM24D4-000
Description
Aspen, LGM24D4-000, Air Handler, High Efficiency, Series: LGM Series, 2 ton Nominal, 18000 to 24000 Btu/hr Cooling, 120 VAC, 1/3 hp Power Source, 15 A Fuse, 12 X 20 in Filter, R-410A Refrigerant, Aluminum, 40 in H x 21-1/2 in W x 14-1/2 in L Dimensions, Domestic
Notice
Price/Availability Accessible On Login- C-20 LICENSE & EPA CERTIFICATE REQUIRED FOR PURCHASE OF THIS PRODUCT
- Upflow or horizontal right as shipped (field-convertible for downflow or horizontal left applications)
- Can be AHRI matched with most brands of air conditioners or heat pumps
- Less than 2% air leakage from cabinet when tested in accordance with ASHRAE standard 193
- Unit must be installed according to Aspen installation instructions
- Sturdy, fully insulated galvanized steel cabinet with knockout for duct return
- Constant torque ECM speeds and torques are controlled by software embedded in the motor to maintain constant torque
- Motors are pre-programmed with speeds and torques at the factory for optimal performance and reliability
- Direct drive blowers circulate air quietly and efficiently
- Rail mounted blowers provide easy removal for service and maintenance
- An electronic board controls the functioning of the system reducing moving parts
- The board provides for various hot water supply source connections and the blower time delay to maximize heat/cool extraction
- As an enhanced feature the pump circulates hot water every 6 hours to prevent coil freeze during off cycle
- High efficiency rifled aluminum tubes and enhanced aluminum fins provide maximum heat transfer
- All coils factory leak tested with two-stage pressure decay and mass spectrometer process, then nitrogen pressurized, and factory-sealed for maximum reliability
- Available with either factory-installed orifice or TXV metering device
- Field-installable bolt-on TXVs are also available
- Access door allows for easy coil cleaning
2 TON HIGH EFFICENCY MULTI-POSITION ALUMINUM AIR HANDLER
| Type | Cooling |
| Nominal Capacity | 2 ton |
| Cooling Capacity | 24 Kbtu/hr |
| Series | LGM |
| Dimensions | 40 in H x 21-1/2 in W x 14-1/2 in L |
| Domestic/Import | Domestic |
| Filter Size | 12 x 20 in |
| Fuse Size | 15 A |
| Material | Aluminum |
| Power Source | 120 VAC, 1/3 hp |
| Refrigerant Type | R-410A |
| Brand | Aspen |
| Country of Origin | US |
| Manufacturer | Aspen Manufacturing |
| Manufacturer Part Number | LGM24D4-000 |
PROP 65
Notice
Price/Availability Accessible On Login- C-20 LICENSE & EPA CERTIFICATE REQUIRED FOR PURCHASE OF THIS PRODUCT
- Recommended Accessories
- Competitive Brands
- Recently Viewed
No applicable products
No applicable products
No applicable products
AspenLGM Cooling Air Handler, 2 ton, 24 Kbtu/hr
- Customers Also Purchased
No applicable products