Pressure Regulator, 2 to 20 gpm, 50 psi, 1 in, FNPT

The regulators are preset to regulate pressure in the field. These are recommended with Wasteflow Classic and optional with Wasteflow PC. Under normal operating conditions the pressure in the dripline should be: 10 - 45 psi for Wsteflow Classic and Wasteflow PC Flow restriction shall be negligible until the factory preset pressure is reached. Regulatory accuracy shall be within +/- 6%. Inlet and outlet size shall be ¾” FIPT. The body shall be constructed of high impact engineering grade thermoplastics. Regulation shall be accomplished by a fixed stainless steel compression spring enclosed in a chamber separate from the normal water passage. Each regulator shall be water tested for accuracy.