Temperature & Pressure Relief Valve, 1-1/4 in, MNPT x FNPT, Bronze
PartWTTN241X5125
MFG0318820
Description
WATTS® Temperature/Pressure Relief Valve, Automatic Reseating, Series: N240X, 1-1/4 in Nominal, MNPT x FNPT, 125 psi, 210 deg F, Media: Water, Bronze Body, 3-1/4 in W x 7-3/8 in H, Domestic
Price/Availability Accessible On Login
- 5 in thermostat length
- Non-mechanical seat-to-disc alignment
- Thermostat is accurate and proven exclusively designed and manufactured by WATTS
- Tamper-resistant bonnet screws
- Series 40 and 140 feature a unique thermostat with a special thermo-bonded coating
- Series 140 sizes 1 in (25 mm) and above are standardly furnished with stainless steel thermostat tube
- The discharge line must be the same size as the valve outlet and must pitch downward from the valve and terminate at least 6 in (152 mm) above the floor drain where any discharge will be clearly visible, For 100DT Discharge line consult your WATTS agent
- Inquire with governing authorities for local installation requirements
- A relief valve functions in an emergency by discharging water, Therefore, it is essential that a discharge line be piped from the valve in order to carry the overflow to a safe place of disposal
- This device is designed for emergency safety relief and shall not be used as an operating control
Series N240X, N241X Automatic Reseating Temperature and Pressure Relief Valves are used in commercial water heater applications to provide automatic temperature and pressure protection to domestic hot water supply tanks and hot water heaters. They feature a bronze body, stainless steel spring and thermostat tube, tamper-resistant bonnet screws, automatic reseating feature, and test lever. Model N240X has a NPT female inlet and NPT female outlet. Mode N241X has a NPT male inlet and NPT female outlet. Series N240X, N241X are ASME rate and CSA listed. Temperature Relief: 210 deg F (99 deg C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar), Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).
| Nominal Size | 1-1/4 in |
| End Style | MNPT x FNPT |
| Material | Bronze |
| Body Material | Bronze |
| Dimensions | 3-1/4 in W x 7-3/8 in H |
| Domestic/Import | Domestic |
| Media | Water |
| Pressure Rating | 125 psi |
| Temperature Rating | 210 deg F |
| Type | Automatic Reseating |
| Brand | WATTS® |
| Package Width | 3.25 in |
| Package Height | 15.88 in |
| UNSPSC | 40141606 |
| Alternate Part Number 1 | N241X |
| Package Length | 2.75 in |
| Country of Origin | US |
| Manufacturer | Watts Water Technologies |
| UPC | 098268016420 |
| Manufacturer Part Number | 0318820 |
Limited
ANSI Z21.22|ASME Section IV|CSA Certified|MIL-V-136-12D|SA® Certified | PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Commercial Water Heater
Price/Availability Accessible On Login
- Recommended Accessories
- Competitive Brands
- Recently Viewed
No applicable products
No applicable products
No applicable products
WATTS®Temperature & Pressure Relief Valve, 1-1/4 in, MNPT x FNPT, Bronze
- Customers Also Purchased
No applicable products