Sandblaster® Atmospheric Commercial Gas Water Heater, 100 gal, Natural Gas, 199 Kbtu/hr, Ultra Low NOx
PartSTASBL100199NE
MFG100120199
Description
State Industries Gas Water Heater, Series: SANDBLASTER®, 199000 Btu/hr Heating, Natural Gas, 100 gal Tank, Intermittent Ignition, Atmospheric Vent, 531 gph at 36 deg F Rise Recovery, 80 % Energy Efficient, 1-1/2 in Water Connection, 160 psi, 1400 to 1600 deg F, Tall or Short: Tall, Ultra Low NOx: Yes, ASME Yes/No: No, Baked Enamel
Price/Availability Accessible On Login
- Fan assisted combustion the blower is built into the low NOx burner assembly
- Complies with California SCAQMD Rule 1146.2 and other air quality management districts with similar NOx emission requirements of 14 NG/J or 20 ppm
- Air-flapper a stainless steel air flapper is used inside the premix system to replace externally mounted flue damper to minimize the standby heat loss and to minimize the overall heater height
- Metal venting rated category I appliance, uses standard double wall type "b" vent
- Can be commonly vented with other category I appliances
- Vent connects directly to the vent connector outlet
- An excellent choice for retrofit and upgrade installations
- Water connections for ease of installation, all SBL's feature water connections on the top, front, and back
- The eliminator inlet water connection eliminates harmful scale buildup, extending the life of the product
- The front inlet connection must be used for the eliminator benefits
- Glass-lined tank PermaGlas® ultra coat is the proprietary ceramic coating developed by state's ceramic engineers specifically for the heater
- Glassing is applied after the complete tank has been assembled to give a seamless barrier against hot water corrosion
- Fully automatic digital controls with safety shutoff accurate dependable control system
- Manual reset gas shutoff device for added safety
- Foam insulation saves fuel, helps reduce standby heat loss
- Jacket heavy gauge steel finished with a baked enamel finish over a bonderized undercoat
- Easy cleaning hand hole cleanout allows access for easy cleaning
- Fully tested for safety and performance design certified by the underwriters laboratory for 180 deg F hot water service
- Certified for use on combustible flooring
- Intermittent ignition device eliminates standing pilot
| Fuel Type | Natural Gas |
| Tank Capacity Range | 98 to 100 gal |
| Ultra Low NOx | Yes |
| Type | Tall |
| Heating Capacity | 199 Kbtu/hr |
| Vent Type | Atmospheric |
| ASME Yes/No | No |
| Series | SANDBLASTER® |
| Tank Capacity | 100 gal |
| ASME(Yes/No) | No |
| Energy Efficiency | 80 % |
| Finish | Baked Enamel |
| Ignition Type | Intermittent |
| Pressure Rating | 160 psi |
| Recovery Rate | 193 gph at 100 deg F Rise |
| Tall or Short | Tall |
| Temperature Rating | 180 deg F |
| Vent Size | 6 in |
| Water Connection | 1-1/2 in |
| Brand | State Industries |
| Package Width | 37.75 in |
| Package Height | 83.5 in |
| UNSPSC | 40101826 |
| Alternate Part Number 1 | SBL100199NE |
| Package Length | 42.5 in |
| Manufacturer | A. O. Smith |
| UPC | 091196049034 |
| Manufacturer Part Number | 100120199 |
3 Years Limited
ASME Specified|CSA Certified|UL Listed
Price/Availability Accessible On Login
- Recommended Accessories
- Competitive Brands
- Recently Viewed
No applicable products
No applicable products
No applicable products
State IndustriesSandblaster® Atmospheric Commercial Gas Water Heater, 100 gal, Natural Gas, 199 Kbtu/hr, Ultra Low NOx
- Customers Also Purchased
No applicable products