TP Recirculation Pump, 3/4 hp, 120/208-240 VAC, 1 ph, Bronze
PartGRUTP401602B
MFG96411800
Description
Grundfos Circulator Pump, 1-Stage In-Line Direct-Coupled, Series: TP Series, 59.4 gpm Flow Rate, 1-1/2 in Inlet, 1-1/2 in Outlet, 52.5 ft Maximum Head, 3/4 hp Power, 115/208 to 230 V AC, 9.6/5 to 4.8 A, 60 Hz Frequency, 1 ph, 145 psi Maximum, 3450 rpm Motor, 1.25 Service Factor, AISI 304 Stainless Steel Impeller, 104 deg F Ambient, Totally Enclosed Fan Cooled Enclosure, Bronze, 292 mm L x 467.7 mm H Dimensions
Price/Availability Accessible On Login
- This pump model is notable for its high levels of reliability and efficiency
- Quiet, highly-efficient motors are standard components
- All TP pumps are electro-coated to ensure high corrosion resistance
- Optimized hydraulics for high efficiency
- Reduced power consumption
- Top-pull-out design
- Easy dismantling for service
- Unlike end-suction pumps, in-line pumps allow the use of straight pipe work, which often results in reductions in installation cost and amount of space occupied
- The impeller is hydraulically and mechanically balanced to increase the life of motor bearings and shaft seals
- Pump housing and pump head/motor stool are electro-coated
- Improved corrosion resistance
- Industry standard flange-to-flange dimensions for easy retrofit applications
- Stainless steel impeller and seal ring for extended pump life
- TP pumps are fitted with high-efficiency motors
- Oversize motor pump version
- DN40 nominal diameter of inlet and outlet port
- Basic pump version
- Bronze pump housing and motor stool
- Bellow rubber shaft seal, Tungsten carbide rotating face, Carbon resin-impregnated stationary seal face and EPDM secondary seal
Grundfos TP vertical in-line pumps are used in a variety of applications. The pumps are all single-stage, in-line centrifugal pumps with standard motors and mechanical shaft seals. The pumps are of the close-coupled type, i.e. pump and motor are separate units. Consequently, the pumps are less sensitive to impurities in the pumped liquid than similar pumps of the canned rotor type.
| Power Rating | 3/4 hp |
| Voltage Rating | 120/208-240 VAC |
| Phase | 1 ph |
| Material | Bronze |
| Series | TP |
| Amperage Rating | 9.6/5 to 4.8 A |
| Dimensions | 292 mm L x 467.7 mm H |
| Enclosure Type | Totally Enclosed Fan Cooled (TEFC) |
| Flow Rate | 59.4 gpm |
| Frequency Rating | 60 Hz |
| Horsepower | 3/4 hp |
| Impeller Type | AISI 304 Stainless Steel |
| Inlet Size | 1-1/2 in |
| Maximum Head | 52.5 ft |
| Maximum Pressure | 145 psi |
| Motor Speed | 3450 rpm |
| Outlet Size | 1-1/2 in |
| Service Factor | 1.25 |
| Temperature Rating | 104 deg F Ambient |
| Type | Direct-Coupled 1-Stage |
| Brand | Grundfos |
| UNSPSC | 40151503 |
| Alternate Part Number 1 | TP 40-160/2 B A-G-Z-BUBE |
| Manufacturer | Grundfos |
| UPC | 5700390524234 |
| Manufacturer Part Number | 96411800 |
Baldor® 84Z04953 1-Phase 2-Pole Motor
CSA Certified|UL Listed
Price/Availability Accessible On Login
GrundfosTP Recirculation Pump, 3/4 hp, 120/208-240 VAC, 1 ph, Bronze